The Hybrid Audio Legatia L4 is the big brother of the L3, which has achieved tremendous success. If the installation location allows the use of a slightly larger element than L3, L4 is an absolute choice for the top end of any system.
The frequency range of the L4 is without competitors: 100 - 17,000 Hz! It is not necessary to use separate treble toward or up to about 15 degrees to the side. A frequency range of seven octaves is possible thanks to the right type of cone material and phase plug. Right offset by the attenuation of the highest frequencies, the correctly oriented L4s provide a tangible, precise, unified sound image where the instruments and the singer are pinpoint in place
Features
- Very wide frequency range. Allows use without separate treble.
- High electrical and mechanical power resistance
- Extensive, controlled directional pattern. In mid-range operation alone, it is also ideal for the dashboard towards the windscreen.
- Specially designed for freeair installation. Also works well encapsulated, dipole, horn-loaded and in the transmission line
Technical information
- frequency range 100 - 17,000 Hz (high pass 24 dB / oct)
- total diameter 118 mm
- immersion depth 53.5 mm
- mounting hole 94.5 mm
- power consumption 60 W rms (without crossover)
- power endurance 200 W rms (high pass 100 Hz / 24 dB / oct)
- sensitivity 89 dB (2.83 V / 1 m)
- voice coil diameter 25.4 mm
- cast aluminum frame
T / S parameters:
- Qts 0.500
- Fs 90 Hz
- Vas 2.54 l
- Mms 4.22 g
- Ccm 706.4 μm / N
- BL 3.74 Tm
- Re 3.4 ohm
- Qes 0.61
- Qms 2.61
- Xmax 2.6 mm (one way)
- Sd 5000 mm2