- 14 päivän palautusoikeus
- Toimitusaika varastotuotteilla 1-3 päivää
- Tutut ja turvalliset maksutavatat
Maksa halutessasi osissa tai laskulla
"Loistava palvelu ja tietämys asioista." - Pertti R.
"Suosittelen lämpimästi." - Leevi H.
The AW-36X replaces the super-popular AW-36 construction kit. The speaker is implemented with Hifitalo's own coaxial element and a strong bass midrange. The sound of the speaker is balanced, but the bass reproduction is sturdy, so the speaker is perfect for home theater use or even a larger space.
The AW-36X speaker enclosure is divided by a spacer inside into two separate Transflex enclosures. The upper housing part has a 6.5 "Seas T18REX / ACG coaxial element as an element. The element is the same as that used in the AW-10X construction series. The lower part has a 6.5" Seas P18RNX / P with phase switch as an element. Each housing part has its own reflex tube, the lower part has an excitation frequency of about 30 Hz and the upper part about 38 Hz. Due to the larger volume as well as the lower tuning, the lower element reproduces the lower one, so it corresponds to the reproduction of the lowest sounds. The load on the upper element is also smaller, so the motion deviation does not become large and the reproduction of the midrange is thus less colored.
The crossover filter follows much the same base as that used in the nAW-10X speaker. The treble filter is completely identical to them. The subwoofers are connected in series. To obtain uniform directivity, the repetition of the lower element is limited at its upper end. Due to the series connection, the sensitivity of the speaker is the same as it would be when used with one element, but the power endurance is doubled. Distortion and compression are also half as low as when used with a single element. Thanks to the connection, the AW-36X speaker works electrically like a 2-way speaker, even though the ser is actually a 3-way speaker. Therefore, the phase playback is identical to the AW-10X speaker. This means better integration than normal in multi-channel playback when this model is used as a center speaker with the AW-36X speaker.
The sound of the AW-36X is very similar to that of the AW-10X, however, the bass reproduction extends well below, at about 30 Hz. Increased directivity also brings more clarity to the midrange range. In a home theater, the sound image is very consistent when the center speaker is AW-10X.
The set includes the following parts for one (1 piece) speaker:
- speaker elements
- crossover filter parts
- T122 / 96 terminal screw panel
We recommend ASPA damping material as the damping material.
Amount of wadding required for the enclosure according to the speaker drawings: 710 g / speaker
If you do not want to make the case yourself, you can order it ready-made. The pattern wood makes speaker cases from MDF or glulam according to the customer's wishes. The selection includes almost all the building kits sold by Hifitalo, and if necessary, you can also submit the speaker drawings yourself. See the link below for more information and prices.
Payment & security
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.